Hardwood flooring can be obtained in prefinished or unfinished form. Hardwood in unfinished form is to some extent cheaper in comparison to prefinished form, however, this does need staining (though optional), light sanding and sealing immediately after installation. In the prefinished variety you can utilize the same immediately after installation. However, with unfinished hardwood flooring, you require limiting utilization till its sealing. After sealing, there is a need to wait for minimum forty eight hours so as to give time for drying the sealant. After that additional coats might be needed. In unfinished type, you would be able to stain the same and according to your need it can be sealed with exact specification. The advantage with prefinished type is the rapid turnaround time.
One common hardwood is flooring with bamboo which is a type of grass and this is termed generally as the hardwood. Bamboo flooring is valued highly for its environmentally-friendly and green qualities. Hardwood should be fixed on a sub-floor of wooden type. Not like the options of other wood flooring, it could not be fixed on concrete in a straight forward manner or upon the top of present floor. Owing to the requirement of nail-down, it is suggested that installers of hardwood floor should be hired. If you like, it is feasible to hire floor staplers from the centres of home improvement.
As hardwood is particularly vulnerable to dents and scratches, you should opt for Janka Hardness Rating Scale and purchase a species such as ash, oak etc which would be within your budget and suitable to your lifestyle also. Greatest advantage of hardwood flooring is it may be re-sanded many times, ensuring its longevity and durability for decades. The main weakness for this type of flooring is that its installation procedure cannot be carried out in wet areas like bathrooms or basements.
Another good alternative to hardwood flooring is engineered wood flooring. Although flooring firms would protest vociferously at this proposal, basically engineered flooring is a combination of plywood and finish wood. The finish wood is commonly found and utilized. The plywood below contains eighty to ninety percent of the floor area. However, this is the plywood which differentiates solid hardwood from engineered wood flooring. The other attractive thing regarding engineer wood is the choices for installation. The thicker types may be set up as floating floors while the thinner kinds may be nailed down.